Samsung WEC8500 Operation Manual page 299

WEC8050 / WEC8500 Operation Manual
7.3.2 Voice CAC Configuration
To protect existing calls, the voice CAC function configures maximum allowed number of
calls and rejects any call request when the maximum number is exceeded. You can
configure the number of marginal voice calls for handover.
Configuration using CLI
For voice CAC configuration, execute the command as follows:
1) Go to configure  voice CAC mode of a wireless section of CLI.
APC# configure terminal
APC/configure# [80211a/80211bg] cac voice
APC/configure/80211a/cac/voice#
2) Enable or disable the voice CAC function.

acm [MODE]
Parameter
MODE
3) Configure maximum allowed number of voice calls.

max-calls [VALUE]
Parameter
VALUE
4) Configure the number of marginal voice calls considering the handover.

reserved-ho-calls [VALUE]
Parameter
VALUE
5) To check the configured voice CAC information, use the 'show [80211a | 80211bg]
cac voice configuration' command.
© Samsung Electronics America
Enables or disables the voice CAC function
- enable: Enable
- disable: Disable
Maximum allowed number of voice calls.
Number of marginal voice calls considering the handover
Description
Description
Description
Version 7.1
page 299 of 673