Samsung WEC8500 Operation Manual page 520

WEC8050 / WEC8500 Operation Manual
Station Statistics
They provide the statistics of the network optimization to check service, tracking,
debugging, status transition, etc. of a station. Main statistics items provided include station
latency upon connection and handover, attempt count, statistics by failure reason, RSSI,
success rate, data rate by AP, Disassoc/Deauth statistics, statistics by reason, handover path
statistics, kickout statistics by AP, number of users, scanning statistics by AP, etc. and
provide such statistics by 5 min., one hour, 24 hours, and total period by WLAN, AP,
Radio, and Device Type.
Configuration using CLI
1) Enable or disable station network statistics.

network-stats statistics station [MODE]
Parameter
Mode
APC# configure terminal
APC/configure# network-stats statistics station enable
Enabled Station Net-Stats
APC/configure# no network-stats statistics station enable
Disabled Station Net-Stat
2) Enable or disable station statistics alert.

network-stats alert station [MODE]
Parameter
Mode
APC/configure# network-stats alert station enable
Enabled Station Net-Stats Alert
APC/configure# no network-stats alert station enable
Disabled Station Net-Stats Alert
© Samsung Electronics America
Whether to configure network statistics
- enable: Setting
- disable: Release (by default)
Whether to configure network statistics alert
- enable: Set (by default)
- disable: Cleared
Description
Description
Version 7.1
page 520 of 673