Figure 91. Ap Profile Setting (1) - Samsung WEC8500 Operation Manual

WEC8050 / WEC8500 Operation Manual
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Access Points>  AP selection  <General> menu in the sub-menus.
The setting options in the General tab are as follows. Click the <Apply> button to apply
the settings.

AP NAME: AP name

AP GROUP NAME: Indicates name of the AP GROUP to which the AP belongs.

REMOTE AP GROUP NAME: Indicates name of the REMOTE AP GROUP to which
the AP belongs.

AP MODE: AP operational mode (General AP/Root AP/Repeater AP/Sniffer AP)

MAC ADDRESS: Cannot be changed to the MAC address of an AP.

MAP LOCATION

LOCATION: Information of location where an AP is installed

IP ADDRESS: IP address of AP

IP ADDRESS POLICY: IP address mode

DISCOVERY TYPE: AP discovery type

ADMIN STATUS: AP administrative status

OPER STATUS: Current AP operational status

PRIMARY CONTROLLER NAME, SECONDARY CONTROLLER NAME,
TERTIARY CONTROLLER NAME: Redundancy mode
For WEC8050, the TERTIARY CONTROLLER NAME is not supported.
© Samsung Electronics America
Figure 90. AP Profile Setting (1)
Version 7.1
page 194 of 673