Figure 30. Spanning Tree Configuration Window (1) - Samsung WEC8500 Operation Manual

WEC8050 / WEC8500 Operation Manual
[bridge priority]
This command configures the priority of a bridge. The 'no' parameter is used to delete a
priority.

bridge 1 priority [PRIORITY]

no bridge 1 priority
Parameter
PRIORITY
[bridge shutdown]
This command clears bridge settings. The 'no' parameter is used to restart a bridge.

bridge shutdown [1-32]

no bridge shutdown [1-32]
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <Network>  <MSTP> menu in the sub-menus.
The sub-menus of the MSTP menu are as follows:

Config: Configures the spanning tree.

Instance: Manages the MSTP VLAN instance.

Port: Manages the MSTP port.
[Configuring Spanning Tree]
After selecting the <Config> menu, enter configuration information and then click the
<Apply> button.
© Samsung Electronics America
Figure 29. Spanning Tree Configuration Window (1)
Description
Bridge priority (range: 0-61440)
Version 7.1
page 69 of 673