Samsung WEC8500 Operation Manual page 206

WEC8050 / WEC8500 Operation Manual
Configuration using CLI (Upgrade environment)
To configure AP upgrade related environment, the following command is provided.
First of all, go to the configure  AP-all  upgrade mode of CLI.
WEC8500# configure terminal
WEC8500/configure# ap-all
WEC8500/configure/ap-all# upgrade
WEC8500/configure/ap-all/upgrade#
[select-package]
This command configures a package to use during AP upgrade.

select-package [UPGRADE_TYPE] [FILE_NAME]
Parameter
UPGRADE_TYPE
FILE_NAME
[target]
During entire upgrade, you can select whether to maintain individual configured AP
version of an AP or perform upgrade.

Target [AP UPGRADE TARGET]
Parameter
UPGRADE TARGET
[transfer-protocol]
This command selects a transmission protocol that is used to transmit the package file of an
AP from the WEC8500 to the AP.

Transfer-protocol [AP TRANSFER MODE]
Parameter
TRANSFER_MODE
© Samsung Electronics America
Configures upgrade type (default/quick-upgrade/predownload)
- default: AP image that is referred to during provision upgrade.
- quick-upgrade: AP image that is referred to for entire AP upgrade
upon an operator's request.
- predownload: AP image that is referred to download AP image to
AP during entire AP upgrade.
Image file name that will be used for AP upgrade
Upgrade target (all/ keeping-individual)
- all: Perform upgrade for all the APs. (default)
- keeping-individual: While maintaining individually configured ap
version, perform upgrade for the rest APs.
File transmission protocol (ftp/sftp)
- ftp: ftp is used for file transmission.
- sftp: sftp is used for file transmission.
Description
Description
Description
Version 7.1
page 206 of 673