Samsung WEC8500 Operation Manual page 272

WEC8050 / WEC8500 Operation Manual
6.1.2 802.11n Configuration
The 802.11n configuration is as follows:
Configuration using CLI
1) Go to configure  radio mode (80211a or 80211bg) to configure of CLI.
WEC8500# configure terminal
WEC8500/configure# 80211a
2) Go to the 11n-support mode.
WEC8500/configure/80211a#11n-support
3) Configure an AP so that it can support 802.11n property.
WEC8500/configure/80211a/11n-support# enable [AP_ID]
GROUP_ID {all-ap/active-ap}/global]
Parameter
AP_ID
GROUP_ID
all-ap
active-ap
4) Configure the Modulation and Coding Scheme (MCS) rate.
WEC8500/configure/80211a/11n-support# mcs [RATE] global
Parameter
5) To check the configured 11n-support information, use the 'show 80211a radio-config
ap [AP_ID]' command.
[OPTIONS]

Guard-interval(11n): select short/long for each Guard-interval 20/40 Mhz.

Beamforming : select use or not use.
© Samsung Electronics America
AP ID (range: 1-500)
ID of the AP group
Applies to all APs in the group
Applies to all live APs in the group
RATE
Description
Description
MSC rate (range: 0-23)
Version 7.1
page 272 of 673