Samsung WEC8500 Operation Manual page 342

WEC8050 / WEC8500 Operation Manual
7.11.2 Detecting WLAN-based Communication Failure
You can configure whether to detect WLAN-based communication failure.
Configuration using CLI
1) Go to the configure mode of the CLI.
APC# configure terminal
APC/configure#
2) Enable or disable communication failure detection.

[no] call-fail-detect [WLAN_ID]
Parameter
WLAN_ID
3) To check the configured connection limitation information, use the 'show voip config
[WLAN_ID]' command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<WLANs> menu in the sub-menus. Select a WLAN ID to change in the WLANs screen
and go to the <Advanced> tab.
After configuring the VOIP FAILURE DETECT item, click the <Apply> button.
© Samsung Electronics America
Figure 174. Detecting WLAN-based communication failure
Description
WLAN ID (range: 1-240)
Version 7.1
page 342 of 673