Samsung WEC8500 Operation Manual page 252

WEC8050 / WEC8500 Operation Manual
[Configuring Fixed IP Address to MAC Address]
This command configures a fixed IP address to a specific MAC address or deletes the
configuration.
The 'range' of IP address to configure cannot be overlapped with the IP range and
maximum 255 IP addresses can be configured. In addition, use the 'no fix-address all'
command to delete all the configured values.

fix-address [aa:bb:cc:dd:ee:ff A.B.C.D]

no fix-address [aa:bb:cc:dd:ee:ff A.B.C.D]

fix-address all
As shown in the below example, 100.100.100.10 can be always allocated to the IP address
of a wireless terminal whose MAC address is 11:22:33:44:55:66.
WEC8500/configure/ip/dhcp/pool test# fix-address 11:22:33:44:55:66
100.100.100.10
[Configuring IP Address Lease Time]
Configure the time when a wireless terminal receives an IP address. The 'lease infinite'
command configures the time infinitely. If 'no' parameter is entered in front of the
command, it is configured to 24 hours (default).

lease [TIME]

lease infinite

no lease
Parameter
[Configuring NTP Server]
Up to 3 IP addresses of a NTP server can be configured or deleted. In addition, use the 'no
ntp-server all' command to delete all the configured addresses of a NTP server.

ntp-server [IP_ADDRESS]

no ntp-server [IP_ADDRESS]

no ntp-server all
Parameter
IP_ADDRESS
© Samsung Electronics America
TIME
Description
Lease time (range: 120-8640000, Unit: s)
Description
The IP address of the NTP server
Version 7.1
page 252 of 673