Samsung WEC8500 Operation Manual page 129

WEC8050 / WEC8500 Operation Manual
2) Perform PIM configuration.

ip pim sparse-mode: Enable

no ip pim sparse-mode: Disable
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <Multicast>  <PIM-SM> menu in the sub-menus. When you click the
<Add> or <Delete> button, you can add or delete PIM-SM configuration.
Follow the below procedure to add a PIM.
1) In the PIM-SM initial window, click the <Add> button.
2) Click the <Select Interface> button.
© Samsung Electronics America
Figure 47. PIM-SM Configuration Window (1)
Figure 48. PIM-SM Configuration Window (2)
Version 7.1
page 129 of 673