Samsung WEC8500 Operation Manual page 401

WEC8050 / WEC8500 Operation Manual
Parameter
unmanaged-ap-uses-managed-
ssid
unmanaged-ap
3) To check the configuration of automatic blocking, it is possible to use the following
command:

show wids containment current-config
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select
<Wireless Intrusion>  <Containment> menus in the sub-menus.
Select the target and press Apply to configure automatic blocking.
© Samsung Electronics America
If the honeypot is detected, it is automatically blocked.
If the unmanaged AP is detected, it is automatically blocked.
Figure 206. Automatic Blocking Configuration Window
Description
page 401 of 673
Version 7.1