Contents Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin’s will to create environment-friendly products, and indicates Table of Contents •...
~ 40 ºC • Do not place the appliance in direct sunlight. The SPC-1010 PTZ Controller controls the operation of the PTZ Dome and Zoom Camera - This may discolor the appliance. series and the SRX-100B Receiver. • Do not apply excessive shock to the appliance.
Camera Controller Power Adapter (DC 12V) Terminal Block RXD+ Tx1+ RXD- Tx1- · RS485 Communications Camera Controller SPC-1010 RXD+ Tx1+ RXD- Tx1- TXD+ TRx+ TXD- TRx- • You may use the Tx2 or Tx3 terminal instead of Tx1. User’s Manual...
To turn off the power, hold down the PWR button. ② 2. Initial Screen Display SAMSUNG-T ID : Indicates the current channel number. ① SAMSUNG-T : Indicates the current channel camera protocol. ② 9.6k : Indicates the current channel camera baud-rate. ③ ③ ④...
Controlling PTZ Camera Controlling PTZ Camera 4. Pan / Tilt / Zoom Using Joystick 5. Iris / Focus / Zoom Buttons ■ You can use the joystick to control the camera's Pan and Tilt operations. Screen Brightness ① ■ The farther you move the joystick from the center, the faster the camera moves. ■...
• In order to use Swing and Group modes, you must set up the modes in the camera’s OSD menu 12. AUX prior to actual operation. • The Swing and Group modes only support the Samsung Techwin SAMSUNG-T protocol. ■ Controls the camera’s Aux output operation. AUX ON : Press the AUX button to turn AUX on.
• For the default settings values, please refer to the ■ Displays the current version of the controller firmware. picture on the right. Protocol : Samsung Techwin SAMSUNG-T Baud Rate : 9.6Kbps, Parity Bit : None 2-2. Serial Data Transfer Standard ■...
Page 9
Setting Up Controller Environment Setting Up Controller Environment 2-4. Sleep 2-8. Password ■ Enables changing the controller password. ■ If no joystick or button input is detected for a set duration, the LCD screen turns itself off and enters Sleep mode. 2-9.
Setting Up Controller Environment Troubleshooting ● If the power is not turned on 3. Joystick Calibration Please check if the controller is connected to the power adapter. ▶ Press 3 on the number pad. ① ● If the joystick does not move, or the controller buttons are not pressed Hold down the SET button to enter the Joystick Calibration mode.
Page 11
Product Specifications MEMO Product SPC-1010 LCD Display 16 x 2 Character LCD Speed Control Joystick (3-axis Twist Zoom) Samsung Techwin PTZ Dome PTZ Dome SAMSUNG-T, SAMSUNG-E, PELCO-D/P, Panasonic, Vicon, AD, Honeywell Compatible Hardware Zoom SCZ-3430/2430/3370/2370/3250 Camera SDZ-375/370 Receiver SRX-100B Control Capacity...
Page 12
MEMO MEMO PTZ CONTROLLER User Guide PTZ CONTROLLER User Guide...
Page 13
SAMSUNG TECHWIN EUROPE LTD. • • 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS www.samsungcctvusa.com TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungtechwin.com...
Need help?
Do you have a question about the SPC-1010 and is the answer not in the manual?
Questions and answers