Samsung WEC8500 Operation Manual page 390

WEC8050 / WEC8500 Operation Manual
8.2.2.7 Unauthorized Channel Validation Configuration
The unauthorized channel validation function helps an operator detect an AP that uses an
unauthorized channel other than configured channels. The configuration procedure is as
follows:
Configuration using CLI
1) Go to configure  wi  channel-validation configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wi
WEC8500/configure/wi# channel-validation
2) Enable the unauthorized channel validation function.
WEC8500/configure/wi/channel-validation# enable
3) Configure an authorized channel.

add [CHANNEL]
Parameter
CHANNEL
4) To check the changed configuration, execute the following command.

show wi current-config
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Wireless Intrusion>  <Channel Validation> menu in the sub-menus. And then,
operator can configure the SERVICE STATE and Valid Channel List in the screen.
Operator can change configuration after changing the SERVICE STATE and Valid Channel
List and clicking Apply.
© Samsung Electronics America
Description
Authorized channel number (e.g. add 2, 3, 4)
Version 7.1
page 390 of 673