Call Duration Count Start Time - Panasonic KX-TD1232E Installation Manual

4.4 Timer Programming
Description
Selection
Default
Programming
Conditions
Feature References

Call Duration Count Start Time

Sets the number of seconds the system waits between the end of
dialling and the start of the SMDR timer for outgoing toll calls.
When the system has sent out all the digits to the central office and
this timer expires, the system starts counting the call. A display
telephone shows the elapsed time of the call. The starting time and
the duration of a call are recorded in the SMDR record.
Time (seconds): 0 through 60
0 s
1. Enter 212.
Display: SMDR Durat Time
2. Press NEXT.
Display example: Time: 0
3. Enter the time.
To change the current entry, press CLEAR and the new time.
4. Press STORE.
5. Press END.
• The timer starts counting after all the digits are dialled. This timer is
not applied to incoming calls. The timer for incoming calls starts
immediately.
• You cannot leave the entry empty.
Section 3, Features,
Display, Call Information
Station Message Detail Recording (SMDR)
sec
System Programming
212
4-81