Panasonic KX-TD1232E Installation Manual page 602

650 8.4
8-44 DECT Portable Station Section
DECT PS System Programming
PS Registration
10. Press the Book button repeatedly until the display below
appears.
Display: REGISTRATION
11. Press the Auto/OK button.
Display example: DECT-SYS-NO.
12. Enter the DECT system number.
Display example: DECT-SYS-NO.
13. Press the Auto/OK button.
Display example: ENTER PASSWORD
14. Enter the PS password.
Display example: ENTER PASSWORD
You will hear a confirmation tone.
15. Press the Auto/OK button.
Display: DECT-SYS LOCK
=DISABLE
16. Press the Book button to select "DISABLE" or "ENABLE"
for the System Lock.
Display: DECT-SYS LOCK
=DISABLE
17. Press the Auto/OK button.
Display example(if disabled): UNLOCKED
Display example(if enabled):
18. If you select "ENABLE" in step 16, enter a System Lock
password.
Display: ENTER PASSWORD
= ****
19. Press the Auto/OK button.
Display: REENTER PASSWORD
=
20. Enter the System Lock password again.
Display: REENTER PASSWORD
= ****
21. Press the Auto/OK button.
Display: LOCKED
(contd.)
1234
1
=
= ****
ENTER PASSWORD
=