Panasonic KX-TD1232E Installation Manual page 85

2.4.10 9600bps Speed Remote Card /
Message Card* Installation
5. Flatten the cable to replace the inside
cover properly.
Side View
KX-TD1232
Programming Reference
Feature Reference
*: Available for KX-TD816 only.
6. Replace the inside cover and secure the
7. Set the MODE switch to 1.
Cable
8. Replace the front cover.
9. Install the unit to the main unit.
1. Open the front cover.
2. Insert the top side of the Remote card into
3. Press down on the two corners of the
4. Connect the cord to the Remote card
Section 4, System Programming,
[817] TD197 Baud Rate Set
Section 3, Features,
System Programming and Diagnosis with Personal Computer
four screws on the back.
Also, replace the side cover.
MODE
1 2
Refer to Section 2.4.9 "9600bps Speed
Remote Unit / Message Unit Installation"
for installation.
the two hooks on the main unit.
bottom side of the Remote card.
connector.
KX-TD196 REMOTE
9600bps Speed Remote Card
Installation 2-49