Extension Name Set - Panasonic KX-TD1232E Installation Manual

004
Description
Selection
Default
Programming
Conditions
Feature References
4-22 System Programming
4.2 Manager Programming

Extension Name Set

Assigns names to the extension numbers programmed in program
[003] "Extension Number Set."
• Jack number: KX-TD816 – 01 through 16 (-1 / -2)
KX-TD1232 – 01 through 64 (-1 / -2)
(-1 = first part, -2 = second part)
• Name: 10 characters (max.)
All jacks – Not stored
1. Enter 004.
Display: EXT Name Set
2. Press NEXT.
Display: Jack NO?->
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack
number.
Display: #01-1:Not Stored
4. Enter a name.
For entering characters, see Section 4.1.3 "Entering Characters."
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new name.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• There is a maximum of 32 names for KX-TD816, and 128 names for
KX-TD1232. Each name has a maximum of 10 characters.
• Program [003] "Extension Number Set" is used to assign extension
numbers.
• In the case of KX-TD1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available.
• For an explanation of jack numbering, see "Rotation of jack number"
on page 4-7.
Section 3, Features,
Display, Call Information
Special Display Features — Extension Dialling
Intercom Calling