518
Description
Selection
Default
Programming
Conditions
Feature References
4-125.1
System Programming
4.7
CFU / CFB / CFNR Assignment
This program determines which Class of Service (COS) can
perform CFU, CFB and CFNR features.
• COS number: 1 through 8,
• Enable / Disable
All COS – Disable
1.
Enter 518.
Display: CFU/CFB/CFNR
2.
Press NEXT.
Display : COS NO?→
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4.
Keep pressing SELECT until the desired selection is
displayed.
5.
Press STORE.
6.
To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7.
Repeat steps 4 through 6.
8.
Press END.
To assign all COS to one selection, press the
case, the display will show the contents programmed for COS 1.
Section 3, Features,
Call Forwarding — by ISDN Line
COS Programming
( =all COS)
key in step 3. In this