Assigning The Cell Station Id Number To The Ps - Panasonic KX-TD1232E Installation Manual

8.2.5 Site Survey 8.2.5 Site Survey

Assigning the Cell Station ID Number to the PS

1. Set the PS Power Switch to ON while
pressing (Talk),
and at the same time.
2. Press .
ABC
3. Enter the Cell Station number.
4. Press (Talk).
5. Enter the Cell Station ID number.
• To enter letters, press the following but-
A (Hold)
B (OK)
OK
C (Book)
tons.
6. Press (Talk).
• The assignment is completed.
7. Repeat steps 3 through 6 to assign other
Cell Station ID numbers.
8. Press
(Transfer) to return to the initial
CLR
display.
(Flash)
D (Function)
E (Redial)
F (Flash)
DECT Portable Station Section
FUNCTION<0-4>
Example
CS NO?(1-8)
Example
CS ID1=
→
Example
CS ID1=
→
Example
CS ID1=
→0123456789
Example
CS NO?(1-8)
FUNCTION<0-4>
8-21