Panasonic KX-TD1232E Installation Manual page 570

Digital super hybrid system

Hide thumbs Also See for KX-TD1232E:

Table of Contents

8.2.3 Location of the Unit

KX-TD1232 with the KX-TD146

Expansion Unit

DECT Portable Station Section

Up to two Cell Station Interface Units (KX-TD146) can be

installed to any of the three expansion areas on the KX-TD1232.

Up to six Cell Stations (KX-TD142) can be connected to the KX-

Remove the front

cover plate(s).

AC Adapter (KX-A277E)

• System Programming is required for location identification. Refer to

program [109], "Expansion Card/Unit Type," in Section 4.

Default : Area 1 = 4-CO Line Unit

Areas 2 and 3 = 8-Station Line Unit

Select "E1" or "E2" for the Cell Station Interface Unit (KX-TD146).

Both types are the same for an 8-Station Line Unit (KX-TD170).

• KX-TD146 and KX-TD142 can only be connected to the Master

• One AC adapter (KX-A277E) is necessary for each KX-TD146.