Panasonic KX-TD1232E Installation Manual page 703

Digital super hybrid system

Hide thumbs Also See for KX-TD1232E:

Table of Contents

1. The TD290 is being added to an existing PBX.

2. The Network supplier is sending 7 digits of DDI

3. The Extensions are to be assigned as follows:

4. The customer wants two DDI numbers to go to sub addresses on the ISDN Extension

ISDN Extn. No.

5. A Sales ring group is required with DDI Number 7000028 and 202 and 203 as members

6. A Phantom Extension number is required for Service calls, a phantom number can be used to

identify a ring group on a non-display proprietary telephone.

Assign DDI numbers 7000036 & 7 to phantom numbers 366 & 367 to CO line keys on

extensions 201 & 202.

7. The customer wants to modify the outgoing CLI so that when 201 (Manager) makes a call

the Caller ID sent by the network is that of 203 (PA).

1. For this example a TD281 is used to provided the ISDN Extension (S-Bus) on Port 3 and the

TD290 provides the CO Lines.

Assign the TD290 Module to the lower external area.

Prog step / Description

[109] Card Config

[450] PRI Config

[451] PRI Ref CO

[605/6] O/G Permitted Extn.

[615/6] O/G Permitted ISDN Extn

2. If the system has been upgraded from a Version 4 Program Step 111 may have been

modified, this adds or removes digits from the DDI string. The Version 4 Software could

only translate a maximum of 6 DDI digits.

ISDN Worked Example

I/C DDI number / Name

DDI No. 7000020 – 3904

DDI No. 7000024 – 3907

S (TD281) : S3 (TD290) : E1; E2 (TD170)

Set working channels to one CO and Spare

Channels to another (available ref. CO 9 ~ 12)

Set Spare ref. CO to Disabled