Installing The Unit - Panasonic KX-TD1232E Installation Manual

Digital super hybrid system

Hide thumbs Also See for KX-TD1232E:

Table of Contents

8.2.4 Installing the Unit

1. Loosen the two screws on the cover

plate. Insert your fingers into the slits

to remove the cover plate(s).

Any of the cover plates can be

removed as required.

2. Connect the cabinet cord of the Cell

Station Interface Unit (KX-TD144 /

KX-TD146) to the connector in the

main unit firmly.

The following procedures can be used to install a Cell Station

Interface Unit (KX-TD144 / KX-TD146) to the main unit, and then

the Cell Station (KX-TD142) to the Cell Station Interface Unit.

The KX-TD1232 is illustrated as the main unit.

3. Hook the cabinet on the main unit and slide

the cabinet to the left until it is secured.

4. Loosen the outside screw and slide the

cover to the right.

5. Secure the inside screw (included) to

fix the cabinet to the main unit.

Note Be sure to fix the inside screw to the

main unit, or the unit may not work

DECT Portable Station Section

Outside screw

Inside screw