Panasonic KX-TD1232E Installation Manual page 338

016
Conditions
Feature References
4-35.3 System Programming
4.2 Manager Programming
Charge Rate Assignment
• A maximum of nine digits, consisting of 0 through 9, can be assigned as
the rate. The number of decimal places depends on the assignment in
program [015] "Charge Rate Fractional Point Assignment."
• When the ISDN card or unit is installed to the system, the rate cannot
be assigned per CO line. The rate which is assigned to the lowest CO
line number is used for the other lines.
For example, when the KX-TD280 is installed to the KX-TD1232, the
rate assigned to CO09 is used for CO 10 through 12.
• If a different rate is assigned to each CO line, the extension charge fee,
account code charge fee and total extension charge fee meters will not
be displayed correctly. In this case, the meter is calculated by the rate
assigned to CO01.
• When the ISDN S0 line unit or card is installed, you have to restart the
system after programming. Otherwise, the correct charge may not be
displayed. See the "2.7 System Restart" section.
Section 3, Features,
Charge Fee Reference
(contd.)