Panasonic KX-TD1232E Installation Manual page 491

4.8 Extension Programming
CLIP / COLP Number Assignment for TD286 Extension
Description
Selection
Default
Programming
Conditions
Feature References
Assigns a CLIP/COLP number for KX-TD286 ISDN extension.
• Port number: KX-TD816 – 01 through 06,
KX-TD1232 – 01 through 12,
( =all ports)
• CLIP/COLP number: 16 digits (max.)
All ports – Not Stored
1. Enter 632.
Display: TD286 CLIP/COLP
2. Press NEXT.
Display: Port NO?→
3. Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:Not Stored
4. Enter a CLIP/COLP number.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another port, press NEXT or PREV, or
SELECT and the desired port number.
7. Repeat steps 3 through 6.
8. Press END.
• For KX-TD1232, port number 01 through 06 are for the Master System
and 07 through12 are for the Slave, if available.
• To assign all ports to one selection, press the
case, the display shows the contents programmed for the first port.
Section 3, Features,
Calling/Connected Line Identification Presentation (CLIP/COLP)
key in step 3. In this
System Programming
632
4-142.7