Panasonic KX-TD1232E Installation Manual page 390

151-152
ISDN DDI Ringing Assignment — Day / Night
Description
Selection
Default
Programming
Conditions
4-69.11 System Programming
4.3 System Programming
Assigns the destination of each DDI number in the day and night modes.
• Location number: 000 through 399
• Extension number: 1 to 4 digits / 0 (operator) / Not Stored
All locations – Not Stored
1. Enter a program address (151 for day or 152 for night).
Display example: DDI Ring Day
2. Press NEXT.
Display: Location NO?→
3. Enter a location number.
To enter location number 000, you can also press NEXT.
Display example: 000:Not Stored
4. Enter an extension number or 0.
Display example:000:EXT
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another location, press NEXT or PREV, or
SELECT and the desired location number.
7. Repeat steps 4 through 6.
8. Press END.
• Each extension number can be 1 to 4 digits, consisting of 0 through 9.
• When "0" is assigned, the incoming DDI number is sent to the
destination assigned in program [990] "System Additional Information,
Area 01 – Bits 5 and 6."
• These programs become available when "DDI" is selected in program
[420]/[429] "ISDN Ring Service Assignment — Day / Night."
• You can set the extension numbers in programs [003] "Extension
Number Set," [012] "ISDN Extension Number Set," [017] "TD286
Extension Number Set," [127] "Voice Mail Extension Number
Assignment," [130] "Phantom Extension Number Assignment" and also
floating numbers in program [813] "Floating Number Assignment."
201