Panasonic KX-TD1232E Installation Manual page 590

8.3 DECT Portable Station Features
T
ITLE
Charge Fee Reference
Class of Service (COS)
CO Incoming Call
Information Display
Display, Call Information
CO Line Connection
Assignment – Outgoing
Conference
Console
Data Line Security
Direct In Lines (DIL)
Do Not Disturb (DND)
Door Opener
Doorphone Call
Extension Connection
Assignment
8-32 DECT Portable Station Section
• The charge fee reference allowed for a PS is determined by program
[656], "PS Charge Verification Assignment."
• Program [657], "PS Class of Service," is required for assigning each
PS a Class of Service (COS).
• The display type for a PS when an incoming call is received can be
selected by program [676], "PS Incoming Call Display."
• Program [661]–[662], "PS Outgoing Permitted CO Line Assignment
— Day / Night," is used to determine the CO line which can be
accessed by a PS.
• The Conference button can be activated by selecting it on the display.
Refer to "Selecting the Feature Button on the Display" in the User
Manual.
• The Conference button can be assigned on a flexible button.
However, the LED of the flexible button does not work.
• The Console cannot work with a PS.
• Data Line Security for a PS can be set or cancelled by program [668],
"PS Data Line Security."
• A PS can be assigned as the DIL 1:N destination. In this case, program
[659]–[660], "PS DIL 1:N Extension — Day / Night," is required.
• Intercept Routing applies to DIL 1:1. When the line is busy, the PS is
out of range or the PS power switch is OFF.
• "DND" is displayed as notification while on-hook.
• The FWD/DND button can be activated by selecting it on the display.
Refer to "Selecting the Feature Button on the Display" in the User
Manual.
• The FWD/DND button can be assigned on a flexible button.
However, the LED of the flexible button does not work.
• Program [663]–[664], "PS Doorphone Ringing Assignment — Day /
Night," is required for assigning each PS to receive a doorphone call
or to open the door.
• Program [667], "PS Extension Connection Assignment," is used to
assign whether the PS user can perform all accesses or not.
PS C
ONDITION