4.11
Option Programming
COS Additional Information
Conditions
Feature References
5.
Enter your selection (0 or 1).
To change the current entry, press STORE and the new selection.
6.
To program another bit, repeat steps 4 and 5.
7.
Press STORE.
8.
To program another COS, press SELECT and the desired
COS number.
9.
Repeat steps 4 through 8.
10.
Press END.
•
To assign all COS numbers to one selection, press the
Section 3, Features,
Call Forwarding – Follow Me
Calling Party Control (CPC) Signal Detection
Class of Service (COS)
(contd.)
key in step 3.
System Programming
991
4-177