Panasonic KX-TD1232E Installation Manual page 626

677
Description
Selection
Default
Programming
Conditions
Feature References
8-68 DECT Portable Station Section
8.4 DECT PS System Programming
PS Itemized Code Set
Registers an itemized code applied to each PS.
The registered code is inserted into the "I" command position
stored in program [7X22] "LCR Carrier Modify Command."
• PS registration number: KX-TD816 – 01 through 16
• Itemized code: 4 digits (max.)
All PSs – Not Stored
1. Enter 677.
Display: PS Itemized Code
2. Press NEXT.
Display: PS NO?→
3. Enter a port number.
You can also keep pressing NEXT until the desired PS registration
number is displayed.
Display example: PS01: Not Stored
4. Enter an itemized code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new code.
5. Press STORE.
6. To program another PS, press NEXT or PREV, or SELECT
and the desired PS registration number.
7. Repeat steps 4 through 6.
8. Press END.
• There is a maximum of 16 itemized codes for KX-TD816, and 64
itemized codes for KX-TD1232. Each code has a maximum of 4 digits,
consisting of 0 through 9.
Section 3, Features,
Least Cost Routing (LCR)
KX-TD1232 – 01 through 64