Dtmf Time - Panasonic KX-TD1232E Installation Manual

404
Description
Selection
Default
Programming
Conditions
Feature References
4-92 System Programming
4.6 CO Line Programming

DTMF Time

A CO line set to DTMF mode in program [402] "Dial Mode
Selection" can have two settings. This program sets the duration of
the DTMF signals sent to a CO line set to DTMF mode.
• CO line number:
KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 24,
• Time (milliseconds): 96 / 160
All CO lines – 96 ms
1. Enter 404.
Display: DTMF Time
2. Press NEXT.
Display: CO Line NO?–>
3. Enter a CO line number.
To enter CO line number 01, you can also press NEXT.
Display example: CO01: 96msec
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another CO line, press NEXT or PREV, or
SELECT and the desired CO line number.
7. Repeat steps 4 through 6.
8. Press END.
• In the case of KX-TD1232, CO01 through CO12 are for the Master
System and CO13 through CO24 are for the Slave, if available.
• To assign all CO lines to one selection, press the
this case, the display shows the contents programmed for CO01.
• The DTMF time required is determined by the CO line or PBX line.
Section 3, Features,
Dial Type Selection
( =all CO lines)
( =all CO lines)
key at step 3. In