Panasonic KX-TD1232E Installation Manual page 426

411
Conditions
Feature References
4-98 System Programming
4.6 CO Line Programming
Host PBX Access Codes
• This program is only required if a host PBX line is connected to the
system. Program [401] "CO Line Group Assignment" is used to assign
the line to a CO line group.
• There is a maximum of four access codes per CO line group. Each
code has one or two digits, consisting of 0 through 9, and
• If conflicting access codes (such as 8 and 81) are stored for the same
CO line group, the 1-digit code (8) only will be in effect.
• When the programmed codes are dialled, Automatic Pause Insertion
and Toll Restriction are applied to the calls. The programmed pause
time (in program [412] "Pause Time") is automatically inserted after the
access code.
• To assign all CO line groups to one selection, press the
In this case, the display shows the contents programmed for CO line
group 1.
Section 3, Features,
External Feature Access
Host PBX Access
(contd.)
Pause Insertion, Automatic
.
key at step 3.