8.2.4 Installing the Unit
8.2.4 Installing the Unit
Ferrite Core
Roll the cord once
around the ferrite core
and close the core.
Note
Programming References
Feature References
6-3. Insert the modular plug into the Cell Station, and attach the
ferrite core (included) to the plug cord.
15 cm
6-4. Survey the site for the Cell Station by testing the radio signal.
Refer to Section 8.2.5, " Site Survey."
• System Programming is required to assign an extension number to each
portable station.
• For the KX-TD146, an AC adapter is necessary.
The same AC outlet should be used for the main PBX unit and a Cell
Station Interface Unit.
Wrap the cord once around
the upper hook and pass
through the lower hook.
Section 8.4, DECT PS System Programming
[650] PS Registration
[653] PS Extension Name Set
[671] PS Extension Number Set
[672] PS Password Set
[681] PS Radio System ID Reference
Section 8.3, DECT Portable Station Features
Digital Wireless Connection
DECT Portable Station Section
8-15