4.9
LCR Programming
Description
Selection
Default
Programming
Conditions
LCR Leading Digit Entry
By entering numbers into leading digit plan for a maximum of eight
carriers, you are starting the process to determine which CO line
group will be used to route the call.
• Program address: 7X01, X: 1-8 (carrier number)
• Location number: 01 through 80
• Leading digit number: 7 digits (max.)
Carrier 1; Location 1 –
All other locations – Not stored
1.
Enter a program address (7X01).
Display example: LCR L-Digit C1-1
2.
Press NEXT.
Display: Location NO?–>
3.
Enter a location number.
To enter location number 01, you can also press NEXT.
Display example: 01:Not Stored
4.
Enter a leading digit number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
5.
Press STORE.
6.
To program another location, press NEXT or PREV, or
SELECT and the desired location number.
7.
Repeat steps 4 through 6.
8.
Press END.
• There is a maximum of 80 leading digit numbers. Each number has a
maximum of 7 digits, consisting of 0 through 9, and
" " can be used as a wild card character.
7X01
. The character
System Programming
4-147