Panasonic KX-TD1232E Installation Manual page 603

8.4 DECT PS System Programming
Conditions
Feature References
PS Registration
(With a display PT)
22. To program another PS, press NEXT or PREV, or SELECT
and the desired PS registration number.
23. Repeat steps 4 through 21.
24. Press END.
• It is possible to search the display by pressing # (Next) or
in steps 8 and 10.
• You can assign an extension number to each PS also in program, [671]
"PS Extension Number Set."
• The PS password can be assigned in program [672], "PS Password Set."
• One PS must have only one registration number. It is not possible to
assign the different registration number for one PS.
• If the PS extension number or the PS password is changed after
registering, the PS cannot be used until it is registered again in this
program.
• Do not press END after step 15, or it may not registered correctly.
• To re-assign the PS, which is set the System Lock, to the other DECT
system, it is required to cancel the System Lock first in PS Programming,
"DECT System Lock Password Set."
• Register the PS from a manager DPT connected only to the master
cabinet.
Section 8.3, DECT Portable Station Features
Digital Wireless Connection
(contd.)
DECT Portable Station Section
650
(Previous)
8-45