Panasonic KX-TD1232E Installation Manual page 285

3 Features
(4) When all extensions in an UCD group are busy or not available, the incoming outside call
will be handled by the UCD Time Table.
An example is shown below.
UCD Time Table Assignment
UCD FN
1 291
2 292
: :
32
UCD : UCD Group Number (1 – 32)
FN : Floating Number of the Hunting Group
TT : Time Table Number (1 – 4)
Sequence Activation Examples
S4
S4 TR N/A N/A N/A : Sends OGM 4 and then transfers to an overflow extension.
S4 1T
S1 S2 S3
S4 1T S1
S4 1T 4T
S4 RT N/A N/A N/A : Sends OGM 4 repeatedly.
TR N/A N/A N/A N/A : Directly transfers to an overflow extension.
RT N/A N/A N/A N/A : Waits for an idle extension. The caller hears a ringback tone.
N/A N/A N/A N/A : Waits for an idle extension. The caller hears a ringback tone.
1T
1T RT N/A N/A N/A : Waits for an idle extension. The caller hears a ringback tone.
1T TR N/A N/A N/A : Waits for an idle extension for 16 seconds and then transfers to an
† N/A: not available for assignment.
TT
1
2
:
: Sends OGM 4 and then disconnects the line.
: Sends OGM 4, Music on Hold for 16 seconds and then disconnects
the line.
: Sends OGM 1, OGM 2, OGM 3 and then disconnects the line.
: Sends OGM 4, Music on Hold for 16 seconds, OGM 1 and then
disconnects the line.
RT N/A : Sends OGM 4, Music on Hold for 16 + 64 seconds and then
OGM 4 again.
(Intercept Routing – No Answer (IRNA) works.)
(IRNA works.)
: Waits for an idle extension. The caller hears a ringback tone.
(IRNA does not work.)
(IRNA does not work.)
overflow extension.
Sequence Assignment
TT SEQUENCE
1 S1 4T
2 S1 2T
3 S4 RT
4 TR
S1 : Send Outgoing Message (OGM) 1
S2 : Send OGM 2
S3 : Send OGM 3
S4 : Send OGM 4
TR : Transfer to overflow extension
RT : Return to top
Blank : Disconnect the line
1T : Timer – 16 seconds
2T : Timer – 32 seconds
3T : Timer – 48 seconds
4T : Timer – 64 seconds
Features
U
4T TR
3-183