Call Forwarding To Co Line - Panasonic KX-TD1232E Installation Manual

4.7 COS Programming
Description
Selection
Default
Programming
Conditions
Feature References

Call Forwarding to CO Line

This program determines which Classes of Services (COS) are
allowed to perform the Call Forwarding to CO Line function.
• COS number: 1 through 8,
• Disable / Enable
All COS – Disable
1. Enter 504.
Display: Call FWD to CO
2. Press NEXT.
Display: COS NO?–>
3. Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all COS to one selection, press the
case, the display shows the contents programmed for COS 1.
• Program [601] "Class of Service" is used to assign a Class of Service to
each extension.
Section 3, Features,
Call Forwarding – to CO Line
( =all COS)
key at step 3. In this
System Programming
504
4-117