Private Call - Panasonic KX-TD1232E Installation Manual

P
P
redial
Description
Conditions
Programming References
Feature References
Operation References
—User Manual
P
rivate Call
Description
Conditions
Programming References
Feature References
Operation References
—User Manual
3-140 Features
Allows the display proprietary telephone user to check and correct
the dialled number in on-hook state before going off-hook. When
going off-hook, making a call is initiated.
• This feature is available during stand-by state only.
• A line access number is always required to make an outgoing outside
call.
• Making a call is performed at the time the handset is lifted up or the CO
or SP-PHONE button is pressed.
No programming required.
None
Operation – Making Calls
Basic Calling
Allows the user to exclude private calls from the SMDR printout.
When making a private call, if the user enters the pre-set account
code, the dialled number is not included in the SMDR printout.
• It is required to program the account code for private calls in program
[105] "Account Code." The location 001 of the entries is used as the
account code for this feature.
• To prevent private calls, clear the entry above.
Section 4, System Programming,
[105] Account Codes
Station Programming.......................................................User Manual,
Change Fee Management
Section 3, Features,
Account Code Entry
Operation – Making Calls
Calling without Restrictions – Using an account code (Account Code
Entry)
3 Features
Station Message Detail Recording
(SMDR)