Tie-To-Co Transfer - Panasonic KX-TD1232E Installation Manual

453
Description
Selection
Default
Programming
Conditions
36
System Programming

TIE-to-CO Transfer

Enables or disables transferring TIE calls to a CO line on a CO line
group basis. This restriction applies to the following: 1) An outside
call through another PBX 2) Call Forwarding to a CO line 3) Call
Transfer to a CO line.
• CO line group (TRG) number: 1 through 8,
• Enable / Disable
All CO line groups – Disable
1. Enter 453.
Display : TIE-CO Transfer
2. Press NEXT.
Display: TRK GRP NO?→
3. Enter a CO line group number.
To enter CO line group number 1, you can also press NEXT.
Display example: TRG1:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another CO line group, press NEXT or PREV, or
SELECT and the desired CO line group number.
7. Repeat steps 4 through 6.
8. Press END.
None
( =all CO line groups)