Panasonic KX-TD1232E Installation Manual page 707

Registering the Handset ( PS )
• Assign an extension number to each PS.
• Set the PBX to Register.
• Register PS to PBX one at a time.
• The PC screen / Keyphone display shows the PS waiting to register.
Via the PC Programming tool
Step Description : Entry
[ 2 ] Station : 14
[ 14 ] PS Setting 1 : Ext. number
[ 24 ] PS Registration : Y
Registering a PS ( TD7500 )
Step Display : Entry
[ F ] KEY
[ BOOK ] MODIFY BOOK
[ BOOK ] PROGRAMMING
[ OK ] PS - PROGRAM
[ BOOK ] REGISTRATION
[ OK ] Arial signal flashes until a connection is established
DECT – SYS – NO.
1234 : e.g. 1
[ OK ] ENTER PASSWORD = 1234 (Default)
[ OK ] DECT – SYS LOCK = DISABLE
[ OK ] Idle display
Terminating PS registration
• To remove a PS from the system, so it cannot be used.
Via the PC Programming tool
Step Description : Entry
[2 ] Station : 23
[ 25 ] PS Termination : Y
Via a Keyphone
Step
[671]
[650 ]
(allows 4 separate DECT PBX systems to be assigned)
Via a Keyphone
Step
[651]
Description : Entry
PS Ext. Number Set : Ext No.
PS Registration
Description : Entry
PS Termination : Ext No.
2