Panasonic KX-TD1232E Installation Manual page 447

4.6 CO Line Programming
Description
Selection
Default
Programming
Conditions
Feature References
TD286 ISDN Configuration
Assigns the configuration on a TD286 ISDN port basis.
• Port number: KX-TD816 – 01 through 06,
KX-TD1232 – 01 through 12,
( =all ports)
• Point (point to point) / Multipoint (point to multipoint)
All ports – Multipoint
1. Enter 442.
Display: TD286 Accs. Mode
2. Press NEXT.
Display: Port NO?→
3. Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:Multipoint
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another port, press NEXT or PREV, or
SELECT and the desired port number.
7. Repeat steps 4 through 6.
8. Press END.
• For KX-TD1232, port number 01 through 06 are for the Master System
and 07 through12 are for the Slave, if available.
• If one equipment is connected to the ISDN port, select "Point." If
multiple equipment are connected, select "Multipoint."
• To assign all ports to the same selection, press the
this case, the display shows the contents programmed for the first port.
• After this assignment, you should reset the system so that this
assignment is effective.
Section 3, Features,
Integrated Services Digital Network (ISDN) Extension
key in step 3. In
System Programming
442
4-113.6