Panasonic KX-TD1232E Installation Manual page 642

Features
Your telephone
SLT
Making a TIE Call from an Extension
Calls an extension.
10
Dialling Method
Extension no.
TIE line access code + (PBX code) + Extension no.
TIE line access code + PBX code (+ Account code) +
Phone no.
Select CO line group + (PBX code) + Extension no.
Select CO line group + PBX code (+ Account code) +
Phone no.
In addition to the methods above, the system can use the TIE line
for sending CO line access code "9" through the other PBX. When
you dial the CO line access code and the CO line is busy, the
system automatically sends CO line access code "9" to a TIE line
so that you can access the CO line through the other PBX. This is
enabled by program [990] "System Additional Information, Area
08 (Bit 03)".
5. TIE Line Routing Flow Chart
A TIE call is made as follows.
PBX Code Method – 7-abc-xxxx
Extension No. Method – dexx
Is the dialled number identified with the stored
numbers? (Checks in program [100])
Are the accessed digits (abc or de) found in a TIE
Line Routing Table? (Checks in program [340])
Modifies the dialled number if a removed or added
number is assigned. (Checks in program [341])
Your extension no.
Yes:
TIE line access code – 7
Other PBX extension no – de
Yes
TIE or CO call no.
Routes to the TIE or CO line.
Dial Modification
Enable
Enable
Enable
Disable
Disable
No
Not treated as a TIE
call.
No
Reorder tone
NG
Reorder tone