Panasonic KX-TD1232E Installation Manual page 489

4.8 Extension Programming
Outgoing Permitted CO Line Assignment – Day / Night for TD286 Extension
Description
Selection
Default
Programming
Conditions
Determines the CO lines which can be accessed by a TD286
extension in both day and night modes. The extension users can
make outgoing outside calls using the assigned CO lines.
• Port number: KX-TD816 – 01 through 06,
KX-TD1232 – 01 through 12,
( =all ports)
• CO line number: KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 24,
( =all CO lines)
• Enabl (enable) / Disab (disable)
All ports – all CO lines – Enabl — Day / Night
1. Enter a program address (629 for day or 630 for night).
Display example: CO Out(TD286) Day
2. Press NEXT.
Display: Port NO?→
3. Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:CO01:Enabl
4. Enter the desired CO line number, or keep pressing
until the desired CO line is displayed.
To change the current entry, enter the new number.
5. Keep pressing SELECT until the desired selection is
displayed.
6. Press STORE.
7. To program another port, press NEXT or PREV, or
SELECT and the desired port number.
8. Repeat steps 4 through 7.
9. Press END.
• For KX-TD1232, port number 01 through 06 are for the Master System
and 07 through12 are for the Slave, if available.
• To assign all ports to one selection, press the
case, the display shows the contents programmed for the first port.
629-630
key in step 3. In this
System Programming
or
4-142.5