Panasonic KX-TD1232E Installation Manual page 99

2.6 Starting the System for the First Time
KX-TD1232
CAUTION: Once you start up the system and if you turn the power off, do not perform the
above procedures to start the system again. Otherwise, your programmed data is
cleared. To start the system, just turn the power switch on.
2-55 Installation
Power Indicator
Notes • After pressing the Reset button, slide the system clear switch to
"NORMAL" at step 6 while the power indicator is flashing
(approximately within 10 seconds). Otherwise, the system does not
start up with the default values.
• When System Connection is executed, the system will not accept
incoming outside calls for about 4 minutes after sliding the system
clear switch to "NORMAL." The system needs time to establish the
LCR data.
System Clear
SYSTEM
Switch
CLEAR
CLEAR
NORMAL
RESET
Reset Button
To AC Outlet