Panasonic KX-TD1232E Installation Manual page 368

118
Charge Fee Reference Extension Assignment
Description
Selection
Default
Programming
Conditions
Feature References
4-58 System Programming
4.3 System Programming
Assigns extensions that can refer to charges.
• Jack number: KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
• Enable / Disable
All jacks – Enable
1. Enter 118.
Display: Charge Refer Ext
2. Press NEXT.
Display: Jack NO?–>
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display example: #01: Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• In the case of KX-TD1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available.
• To assign all jack numbers to one selection, press the
In this case, the display shows the contents programmed for Jack 01.
Section 3, Features,
Charge Fee Reference
( =all jacks)
( =all jacks)
key at step 3.