I Ntercept Routing - Panasonic KX-TD1232E Installation Manual

3 Features
I
ntercept Routing
Description
Conditions
Programming References
Feature References
Operation References
Provides automatic redirection of incoming outside calls. There are
two types of Intercept Routing. In the first case, a call cannot be
placed to the called party. This is called Rerouting. In the second
case the call is not answered within a programmed time period.
This is called Intercept Routing – No Answer (IRNA).
Items which can have the Intercept Routing destination are:
(1) CO Line Group, (2) Extension, and (3) Hunting Group.
• Intercept Routing applies to DIL 1:1, DIL 1:N, TAFAS, Call
Forwarding, and Station Hunting.
• The final destination of intercepted calls must be programmed for day
and night modes. There are four possible destinations:
1) an extension
2) an external pager
3) a hunting group
• Intercept Routing is activated as shown below, depending on the
combination of incoming type and called destination.
• If Call Forwarding to CO Line feature is set at the IRNA destination,
the call will be forwarded to the specific outside party.
Extension
including Operator
Assigned CO line
DIL 1:N
group
Registered
DIL 1:1
extension
Registered
DDI
extension
No more Intercept
Intercept
Routing
Section 4, System Programming,
[203] Intercept Time
[409]–[410] Intercept Extension — Day / Night
[620]–[621] Extension Intercept Routing — Day / Night
None
Not applicable.
4) a phantom extension
5) a voice mail extension
External Pager/ Hunting Group
Internal ISDN/
Phantom Extension
No incoming calls
No incoming calls
are received.
are received.
Assigned CO line
Assigned hunting
group
group
Assigned CO line
Assigned hunting
group
group
No more Intercept
Assigned hunting
Routing
group
Features
I
3-93