Panasonic KX-TD1232E Installation Manual page 623

8.4 DECT PS System Programming
PS CLIP / COLP Number Assignment
Description
Selection
Default
Programming
Conditions
Feature References
Assigns a CLIP/COLP number for each PS.
• PS registration number: KX-TD816 – 01 through 16,
• CLIP/COLP number: 16 digits (max.)
All PSs – Not Stored
1. Enter 673.
Display: PS CLIP/COLP
2. Press NEXT.
Display: PS NO?→
3. Enter the PS registration number.
You can also keep pressing NEXT until the desired PS registration
number is displayed.
Display example: PS01:Not Stored
4. Enter a CLIP/COLP number.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another PS, press NEXT or PREV, or SELECT
and the desired PS registration number.
7. Repeat steps 3 through 6.
8. Press END.
• Each CLIP/COLP number consists of 0 through 9.
• To assign all PSs to one selection, press the
case, the display shows the contents programmed for PS 01.
Section 3, Features,
Calling / Connected Line Identification Presentation (CLIP / COLP)
KX-TD1232 – 01 through 64,
( =all PS registration numbers)
key in step 3. In this
DECT Portable Station Section
673
8-65