4.2
Manager Programming
Description
Selection
Default
Programming
Conditions
Feature References
Quick Dial Number Set
Stores up to eighty quick dial numbers.
• Location number: 01 through 80
• Desired quick dial number: 24 digits (max.)
All locations – Not Stored
1.
Enter 009.
Display: Quick Dial
2.
Press NEXT.
Display: Location NO?→
3.
Enter a location number.
To enter location number 01, you can also press NEXT.
Display example: 01: Not Stored
4.
Enter a desired quick dial number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To program another location, press NEXT or PREV, or
SELECT and the desired location number.
7.
Repeat steps 4 through 6.
8.
Press END.
• There is a maximum of eighty quick dial numbers. A maximum of 24
digits, consisting of 0 through 9,
or – (hyphen), can be assigned to a quick dial number.
• Before programming, assign a feature number for each location first in
program [104] "Quick Dial Assignment."
Section 3, Features,
Quick Dialling
, #, RECALL or FLASH, PAUSE,
System Programming
009
4-29