520
Call Forwarding from Hunting Group
Description
Selection
Default
Programming
Conditions
Feature References
4-125.3
System Programming
4.7
Enables or disables to perform the Call Forwarding from Hunting
Group on a Class of Service (COS) basis. Calls arriving at any
Hunting Groups ("All") or just calls arriving at your Hunting Group
("Connect") can be forwarded to your extension.
• COS number: 1 through 8,
• Disable / Connect (connected Hunting Group) /
All (all Hunting Groups)
All COS – Disable
1.
Enter 520.
Display: Hunt Group FWD
2.
Press NEXT.
Display: COS NO?→
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: Bkl1:Disable
4.
Keep pressing SELECT until the desired selection is
displayed.
5.
Press STORE.
6.
To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7.
Repeat steps 4 through 6.
8.
Press END.
To assign all COS to one selection, press the
case, the display will show the contents programmed for COS 1.
Section 3, Features,
Call Forwarding – from Hunting Group
COS Programming
( =all COS)
key in step 3. In this