Incoming Call Distribution Group-Queuing Time Table [3-5-3] - Panasonic KX-TAW848 Features Manual

4.3 Groups [3]
Feature Guide References
Feature References
•
Programming References
•
Delayed Ring
Specifies the Delayed Ringing setting of each member. (Applicable when the call distribution
method of the incoming call distribution group is set to Ring.)
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Wrap-up Time
Specifies the length of time that must pass after completing a call before the member can
accept another call.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
4.3.8 Incoming Call Distribution Group—Queuing Time
Table [3-5-3]
A Queuing Time Table can contain up to 16 sequences which control how calls waiting in a
queue are handled. A maximum of 64 Queuing Time Tables can be programmed.
Queuing Sequence—Sequence 01–16
Specifies the command activated by the corresponding sequence.
Default
346 Feature Guide
1.2.2.1 Incoming Call Distribution (ICD) Group Features—OVERVIEW
4.3.14 PS Ring Group [3-9]
Immediate
Immediate, 1–6 Rings, No Ring
1.2.2.2 Group Call Distribution
None
0 s
10 × n (n=0–300) s
1.2.2.6 Log-in/Log-out
None
None