Panasonic KX-TD1232E Installation Manual page 607

8.4 DECT PS System Programming
Description
Selection
Default
Programming
Conditions
Feature References
SXDP Assignment
Disables or enables the Super EXtra Device Port (SXDP) feature
for wired extensions.
• Jack number: KX-TD816 – 01 through 16 (-1 / -2),
KX-TD1232 – 01 through 64 (-1 / -2),
(-1= first part, -2= second part,
• Enable / Disable
All jacks – Enable
1. Enter 654.
Display: SXDP Assign
2. Press NEXT.
Display: Jack NO?→
3. Enter the jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering the jack
number.
Display example: #01-1:Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all jacks to one selection, press the
case, the display shows the contents programmed for the jack 01.
• After this assignment, you should reset the system so that this
assignment is activated.
Section 3, Features
Super EXtra Device Port (SXDP)
key in step 3. In this
DECT Portable Station Section
654
=all jacks)
8-49