Vm Status Dtmf Set - Panasonic KX-TD1232E Installation Manual

4.3 System Programming
Description
Selection
Default
Programming

VM Status DTMF Set

Sets the DTMF signals ("inband") that are transmitted to the Voice
Processing System (VPS), by the Panasonic telephone system,
under all the dial and connect events which the VPS can occur.
The following signals are sent to the VPS with the assigned DTMF
signals:
RBT (ringback tone) : This signal is sent when calling an
BT (busy tone)
ROT (reorder tone) : This is sent when the dialled number is
DND (DND tone)
Answer
Disconnect
Confirm (confirmation tone) :
FWD VM RBT (FWD to VM ringback tone) :
FWD VM BT (FWD to VM busy tone) :
FWD EXT RBT (FWD to extension ringback tone) :
• RBT / BT / ROT / DND / Answer / Disconnect / Confirm /
FWD VM RBT / FWD VM BT / FWD EXT RBT
• DTMF signal number: 3 digits (max.)
RBT – 1; BT – 2; ROT – 3; DND – 4; Answer – 5; Disconnect – #9
Confirm – 9; FWD VM RBT – 6; FWD VM BT – 7; FWD EXT
RBT – 8
1. Enter 113.
Display: VM Status Set
2. Press NEXT to program ringback tone status.
To program another status, keep pressing NEXT until the desired
status is displayed.
Display example: RBT
extension.
: This is sent when the called extension is
busy.
invalid.
: This is sent when the other extension has
DND assigned.
: This is sent when the other extension
answers the call.
: This is sent when the other extension
hangs up.
This is sent when the feature number for
"Message Waiting Lamp" is valid.
Not available (reserved).
This is sent when the called extension
has set Call Forwarding to VPS.
Not available (reserved).
:1
System Programming
113
4-51