Panasonic KX-TD1232E Installation Manual page 624

674-675
PS Extension Intercept Routing — Day / Night
Description
Selection
Default
Programming
Conditions
Feature References
8-66 DECT Portable Station Section
8.4 DECT PS System Programming
Sets the Intercept Routing destination for each PS in both day and
night modes.
• PS registration number: KX-TD816 – 01 through 16,
• Extension number: 2 through 4 digits /
All PSs – Disable — Day / Night
1. Enter a program address (674 for day or 675 for night).
Display example: PS Intercept Day
2. Press NEXT.
Display: PS NO?→
3. Enter the PS registration number.
You can also keep pressing NEXT until the desired PS registration
number is displayed.
Display example: PS01: Disable
4. Enter an extension number.
To change the current entry, press CLEAR and enter the new number.
To disable Intercept Routing, press CLEAR.
5. Press STORE.
6. To program another PS, press NEXT or PREV, or SELECT
and the desired PS registration number.
7. Repeat steps 4 through 6.
8. Press END.
• You can set the extension numbers in programs [650] "PS
Registration," [671] "PS Extension Number Set," [003] "Extension
Number Set," [127] "Voice Mail Extension Number Assignment," [130]
"Phantom Extension Number" and also floating numbers of the external
ringer, hunting groups, and pagers in program [813] "Floating Number
Assignment."
• To assign all PSs to one selection, press the
case, the display shows the contents programmed for PS 01.
• When "Disable" is selected, Intercept Routing is provided according to
the assignment in program [409-410].
Section 3, Features
Intercept Routing
KX-TD1232 – 01 through 64,
( =all PS registration numbers)
Disable (no Intercept Routing)
key in step 3. In this